Climbing Technology ruft zur Überprüfung seiner ROLLNLOCK Seilrolle/Seilklemme auf

Die Sicherheit hat bei Climbing Technology höchste Priorität, aus diesem Grund rufen wir freiwillig zur Überprüfung unserer ROLLNLOCK (Ref. Nr. 2D652) durch den Anwender auf.


Einer unserer Kunden hat einen Funktionsfehler des „Scheibenpositionshebels“ festgestellt.

Bis heute sind keine Unfälle oder Verletzungen bekannt.


Wir bitten Sie, das unten angegebene Inspektionsverfahren durchzuführen. Wenn das Produkt in Ihrem Besitz von diesem Problem betroffen ist, kontaktieren Sie uns bitte, um den Versand auf unsere Kosten zu arrangieren. Das Ersatzprodukt wird Ihnen so schnell wie möglich zugesandt. Wir entschuldigen uns für die entstandenen Unannehmlichkeiten.


Wie ihr bei der Überprüfung vorgehen soll, erfahrt ihr in den Bildern.

Place the device on a stable surface near an edge as shown

Use one hand to hold the device by the connection hole. With the other hand, rotate the cam outward and press down firmly with the palm. Finally, release the cam.

If the cam returns to its original position, it means that the product is not defective and can be used freely.

If the cam goes over the pin on the plate and remains stuck in that position, it means that the product is defective: it can no longer be used under any circumstances and it must be returned to the company.

  • Credits Text Climbing Technology, kletterszene.com
  • Credits Fotos Climbing Technology
  • Beitragsdatum 15. November 2021